Mountain Molds
Proven 30 Caliber Cast Bullet Molds

Many other options are available thru the online design program.

-- 125 - 130 gr. reclaimed shot

-- 0.310" diameter

-- casts nearly 1-diameter but it's intended to be nose-sized in a die that matches your throat

-- approximately 0.870" long after checking & sizing

-- standard shank fits gator 30, add note if you prefer Hornady

aluminum 2-cavity
$110

brass 2-cavity
$120

-- 180 - 190 gr. reclaimed shot

-- 0.310" diameter

-- nose will drop out slightly oversize and is intended to be nose-sized in a die that matches your throat

-- 1.220" long after checking & sizing

-- will stabilize in a 14" twist above 2000 fps

-- calculated G1 BC = 0.340

-- standard shank fits gator 30, add note if you prefer Hornady

-- add note if you prefer a different alloy or diameter

aluminum 1-cavity
$100

brass 1-cavity
$110

-- 180 - 190 gr. reclaimed shot

-- 0.310" diameter

-- nose will drop out slightly oversize and is intended to be nose-sized in a die that matches your throat

-- 1.190" long after sizing

-- will stabilize in a 14" twist above 2000 fps

-- calculated G1 BC = 0.320

-- add note if you prefer a different alloy or diameter

aluminum 1-cavity
$100

brass 1-cavity
$110

-- nose dies to fit Lyman or RCBS lubrisizers

-- includes punch

-- 0.310" entrance, 0.301" exit, taper as specified

-- intended for sizing down, not "bumping" up.

1 degree per side, 0.310" x 0.301"
$60

1.5 degree per side, 0.310" x 0.301"
$60