Many other options are available thru the online design program.
| — 125 – 130 gr. reclaimed shot
— 0.310″ diameter — casts nearly 1-diameter but it’s intended to be nose-sized in a die that matches your throat — approximately 0.870″ long after checking & sizing — standard shank fits gator 30, add note if you prefer Hornady |
aluminum 2-cavity $110 brass 2-cavity |
|||||
| — 200 gr. reclaimed shot
— 0.310″ diameter “Loverider” design — nose will drop out slightly oversize and is intended to be nose-sized in a die that matches your throat — 1.270″ long after checking & sizing — suitable for a 13″ or 14″ twist — real-life G1 BC = 0.300 — standard shank fits gator 30, add note if you prefer Hornady — add note if you prefer a different alloy or diameter |
aluminum 1-cavity $100 brass 1-cavity |
|||||
| — nose dies to fit Lyman or RCBS lubrisizers
— includes punch — 0.310″ entrance, 0.301″ exit, taper as specified — intended for sizing down, not “bumping” up. |
1 degree per side, 0.310″ x 0.301″ $60 1.5 degree per side, 0.310″ x 0.301″ |
 |
||||