93mmFC shown with 70% metplat. Based on a design created and tested by Eirik from Norway. Use the Hornady 375 gas check.
Select Bullet Diameter (0 to +.002″ accuracy)
Select Weight (+/- 5% accuracy, includes gas check)
Please Type in: — metplat as a % of bullet diameter from 70% to 90% — gas check or plain base — nose length (0.400″ – 0.600″ typical)
Also you may specify: — crimp groove (default = no crimp groove) — height of leading band from 0.060″ on up (default = 0.100″) — diameter of the leading band (default = bullet diameter) — groove angle from 30 – 60° (default = 40°) — groove-to-band-height ratio (GtoB) from 0.6 to 1.2 (default = 0.8) — height of the gas check shank from 0.090″ to 0.200″ (default = 0.100″) — optional softnose mold
